KIDS’ WARM & WATERPROOF SNOW HIKING BOOTS SIZE 11-5 - SH500 HIGH

KIDS

HIKING

2 Years

We assess the thermal insulation of our boots based on the field and laboratory tests carried out to measure the perceived cold by a panel of users. As a result, you now have an accurate measure of the temperature at which you are protected with these boots. The comfort temperature rating for these boots is: -6°C for this model.

Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.

Thermal comfort is a balance between the warmth of the boots and its ability to let the foot breathe. Too much heat or not enough breathability means that damp accumulates and cold can set in. We have designed your boots with your activity in mind, be it occasional or regular, with a membrane which prevents water ingress and lets damp out.

We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half submerged in water. We also conducted field tests to measure wear and ageing. During the waterproofness test, we test 3 levels of waterproofness: 2,000 flexes (approx. 4 km walk), 4,000 flexes (approx. 8 km walk) and 8,000 flexes (approx. 16 km walk). This model of boot has been tested for up to 4,000 flexes, which is equivalent to 8 km of walking.

The traction of the boots depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.

Equipped with SNOWCONTACT soles, your boots are designed for maximum grip comfort for hiking and traction on snow. The location and height of the studs (4mm) is inspired by lynx feet and are spaced strategically for optimal grip when hiking on snow on steep terrain. The surface and design of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to not slip.

The SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.

Our engineers conduct laboratory tests to ensure that the product fully meets with your satisfaction in use. Our verifications include the following elements: quality of eyelets and straps, bonding, toxicology, UV resistance, abrasion resistance of the sole and upper components, accelerated ageing.

To be well equipped in winter, we recommend that you follow these guidelines : Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool) Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture. Boot height: adjust the height of the sock to the height of the upper and preferably choose high models if you want more protection.

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. As a result, the fabric does not soak up water and stays light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) for this purpose are available in our stores.

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

The environmental impact of the product is calculated over its entire life cycle and using various indicators. A score from A to E is given to help you easily identify the more eco-friendly products by comparing products of a similar type. Decathlon actively promotes this initiative. Check out our efforts in the area of sustainable development: http://sustainability.decathlon.com/

Store your products in a well-ventilated room away from light and moisture.

Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, our designers create and develop products that are good, simple, and technologically advanced. These are then ruthlessly tested in the field because we believe that the only way to continually improve is to test the products under the real-life conditions that you will experience.

Upper of : 60.0% Polyester, Upper of : 40.0% Polyurethane Outer sole of : 100.0% Polyurethane Warm lining : 82.0% Polyester, Warm lining : 18.0% Polyurethane Lining and sock of : 82.0% Polyester, Lining and sock of : 18.0% Polyurethane