Bike Presta/Schrader Puncture Repair Spray



Made for

repairing and reinflating a tubeless tyre or punctured inner tube instantly and without tools.
The puncture-repair spray lets you repair holes less than 1 mm wide without changing the inner tube or applying a patch.

This product is no longer in stock


view all stores

CompatibilityFor TUBELESS tyres and/or Presta and Schrader inner tubes.
Ease of useDoes not require removal of the inner tube.
Fast actingAllows you to resume riding quickly after experiencing a puncture.
Compact designVery compact design that easily fits in a pocket or bag.
Warranty2 Years
Technical Information

How to use a bike puncture repair spray
1/ Remove the object that created the puncture. 2/ Shake the spray well 3/ Turn the wheel until the valve is on top. 4/ Tightly screw the appropriate fitting (the spray comes with both Schrader and Presta) on to your inner tube's valve. 5/ Hold the spray upright and empty the contents 6/ Turn the wheel to distribute the product evenly. 7/ Ride for a few miles and then reinflate your tyre to the right pressure
Tip from the pros
You should replace the repaired inner tube after your ride. When used to prevent punctures, this product is effective for up to three months.
Directions for use:
Extremely flammable aerosol. Pressurised container: may burst if exposed to heat.Keep out of reach of children.Keep away from heat, hot surfaces, sparks, naked flames and any other source of heat. Do not smoke. Do not spray onto a naked flame or other ignition source. Do not perforate or burn, even when empty. Protect from sunshine. Do not expose to temperatures above 50°C/ 122°F.
Information / Concept / Technology
Our agrochemist engineers, as part of our validation tests for European standards.

Stockage tips
WARNING! Extremely flammable aerosol. Pressurised container: may burst if exposed to heat.


Sort by:
Work Wonders
Used for 1 week or less
I have been carrying this can in my cycle back since I purchased it in 2016. Last night in the wet and the dark it was called upon and worked perfectly. Without instructions or being able to see diagrams on the can using my common sense and instinct used the product and successfully sealed the tyre which has maintained its pressure for the past 20 hours. On my daily 25 mile commute this is great product, excellent value fro money which I could be without.
Very useful
Used for 2 to 8 weeks
Used this on a long ride when I got a puncture. It was far easier than trying to fix the puncture with the limited tools I had available. The gel got me home (30km) without any sign of a problem. I fixed the puncture properly at home and have had no issues with the tube.
Definitely worth having one of these for emergencies.
Twin puncture repair can
Used for 1 week or less
Ive tried this product twice and both times it failed to stop even a small puncture.
Response of the brand
Thank you for your feedback regarding this item. I am an avid user of this item and it does have some limitations (size of the hole) but as long as it is applied correctly (no pressure in tyre, tube and can pointing vertically when applied) then it should work fine.
If you need more assistance, please contact our loyalty team who will be more than happy to assist.
Peter Lazarus, National Cycling Manager, DECATHLON
Crappy Instructions
Used for 1 week or less
I found the instructions after a few minutes...back of wrapper...but they are not very good. They're too small for me to read even with special glasses to increase the print size. There are also too many diagrams by way of explanation and these are not always clear. I suppose they don't have written instructions because those would be more expensive to produce. Hence, I would NOT recommend this product.
Response of the brand
Thank you for your feedback regarding the instructions. We sell this item in all European countries and the diagrams are used for this purpose. There is also a QR code you can scan which takes you to a youtube film demonstrating the item in use.

I use this item and here are a few pointers I have picked up over time. 1) Make sure the tyre is fully deflated before use. 2) Valve must be at the 12 o clock position when filling 3) after securely attaching the sealant to the tyre valve the transparent tube and canister must be as vertical as possible (12 o clock position) and in line with the innertube valve. 4) once content has been emptied and can removed, spin wheel for 20 seconds to spread the foam evenly throughout the innertube.
Peter Lazarus, National Cycling Manager, DECATHLON
Easy to use and effective
Used for 1 week or less
Tried once, worked once! A lot easier than swapping out a tube in the rain.
  • 1
Show results for